Page 3
Introduction M200 Mk2 Attention M200 Mk2 Mozilla Firefox.lnk The Mk2 version has a new Atmega 644 processor, which has a lar- ger memory. Software version 2.00 can only be installed on the M200 Mk2. If you have an M200 Mk1 with the Atmega-163/ -16 processor, you can upgrade this to the current Mk2 version with the Upgrade Kit.
Introduction M200 Mk2 M200 - New features Introduction Introduction - Switching between stations - Function overview Introduction Installation Connection M51 Link IN/ OUT RS 232 Trigger Input: Input A/ B Relay A/ B Voltage ramp 0-10V IR-LINK Setup Button Setup #1 – Trigger input Setup #2 –...
Page 5
As a result, a total of 16 Side room amplifiers can be connected with an M200 inter- *Please observe the system requirements face in a Revox Multiroom sys- New Multiroom Planer V2.00 tem with 4 different zones. Multiroom Planner...
Page 6
Introduction M200 Mk2 Switching between stations using the Revox wall-mounted keypad The M200 Mk2 offers the option Note: Monitor-only devices of selecting specific stations This comfort function is only using the skip keys (<>) on an available with TV models with an M218 wall-mounted keypad, integrated TV tuner.
Introduction M200 Mk2 Function Overview As well as main room operation, the new side room functionality available from software version 2.00 also allows an M200 Mk2 to be connected to an M219 Side room amplifier. You should be aware however, that not all func- tions are available in the side room.
Installation & Connection M200 Mk2 Installation Connection The two wood screws supplied You will find a detailed descrip- can be used for installing the tion of the various M200 inter- M200 Domotic Interface. As well face connection options on the as the four external installation following pages.
Page 9
Installation & Connection M200 Mk2 Connection: Connection M200 with M51/ M219 M200 with external interfaces Socket: M51 LINK IN Socket: M51 LINK OUT Setup: Setup: þ M219: þ M219: The M200 interface is connected The M200 interface is designed with the M51 LINK socket on the for the connection of further back of the M51 or the M219 external interfaces:...
Page 10
This enables the integration of a volts (DC) to the corresponding large number of Loewe televi- input. There are various options sions into the Revox World. that can be carried out when the Which models are supported input is supplied with voltage.
Page 11
M208 Project The switching voltage may Manager device library, under not exceed 42 volts. the heading Revox – Revox Switching voltage: 0- 42 Volt* Domotic M200. All deployed Max. switching current: 4-8 A* RC5 codes are stored in this file.
Page 12
3-pin, screw-fixable Phoenix plug con- nection. Revox recommends the use of a 2-core screened cable (micro- phone cable), where the screen- ing is used as ground. This ca- ble may be a maximum of 30 metres in length.
Page 13
Configuration M200 Mk2 Setup Button Setup #1 – Control Input Function: Trigger input Display: Control Input A/B Connection: Input A/B - page 4 M219: Using the Setup key, you call up the M200 menu, which is shown Using INPUT A and INPUT B, in the M51 display.
Page 14
Configuration M200 Mk2 DVD/CD - TV Please note M51 is switched on with and/or When you are selecting the ð switches over to the correspond- source, you should be aware ing source. that the source that has been assigned to the corresponding Power On: button in the Remote menu will Switches the M51 on with the...
Configuration M200 Mk2 Setup #2 – Relay Relay Functions Function: Relay output Remote Display: Func. Relays A/B The relays are controlled over IR Connection: Relay - page 4 commands (M208) with Re- mote. This function is only Yes, with Link M219: þ...
Configuration M200 Mk2 Setup #3 – IR-Address Setup #3 – Source Function: IR receiver Function: IR Address Display: Remote Source Display: Remote Address Connection: inc. IR-Link - page 5 Connection: - þ M219: M219: Selection of the (IR) sources The relay and dimmer functions that the M200 interface accepts can be controlled through the for dimming and relay functions...
Page 17
Configuration M200 Mk2 Setup #4 a) Slot M51 Setup #4 b) Slot M219 Function: Addr. assignment M219 operation - fig. page 13 Display: Slot Address Connection: M51-Link – page 2 In respect of the M219, the slot þ M219: address defines the assignment to the Side room amplifier.
Configuration M200 Mk2 Example Setup #4 – RS232 Modus In Figure A, an M200 could be Function: RS232 interface connected to each of the Side Display: Serial Port Mode room amplifiers 31 – 34. The M219 Connection: RS232 – page 3 þ...
Page 19
Application: You should select this setting if you want to use the M230 con- trol program for PCs or if you want to access the Revox Sys- tem through domestic facility management equipment such as Crestron and AMX. The Auto Standby option is only...
Configuration M200 Mk2 Video Controller If a video controller for a Loewe The convenient integration can TV was selected on page #4 of course also be used for the Port Mode, a second menu M51’s integrated DVD player. page, Setup # 5 is available. Please refer to the picture on the This page enables you to selec- next page –...
Page 21
Configuration M200 Mk2 Connection plan: Loewe TV (L27xx) with M51 | Adapter* Connection plan: Loewe TV (L27xx) with M219 | Adapter*...
Page 22
Configuration M200 Mk2 Connection plan: HDMI switch with M51 Note The HDMI output on the M51 is only available if the DVS module is installed. ® Gefen : Registered trademark of the Gefen Company/ US...
Configuration M200 Mk2 Connection plan: Loewe TV with M219...
Page 24
- Resolution up to 1080p - HDCP-enabled - Optical audio digital output A crossed Sub-D cable (plug – plug) is required for the trans- mission. Type: Plug-Plug For this reason, you should use the enclosed crossover adapter with the supplied Revox cable.
Page 25
Connection type: Plug - Plug The chassis version can be For this reason, you should use checked in the Loewe television the enclosed crossover adapter Service menu. with the supplied Revox 1:1 ca- The following models can be controlled: · Spheros R32, R37 ·...
Configuration M200 Mk2 Loewe SL1xx / SL2xx /SL3xx The designation SL1xx/ SL2xx/ SL3xx describes the chassis electronics of the Loewe televi- sion and not the television type. The chassis version can be checked in the Loewe television Service menu. Between the M200 interface and the Loewe TV a special cable is needed.
Configuration M200 Mk2 Setup #5 – AV Assignment Function: AV Assignment 1. Selecting audio source Display: Source To start with, select the M51 / Connection: RS232 – page 3 M219 audio source that later þ M219: should activate a particular video input on the Loewe televi- Unknown audio sources sion/ HDMI Switcher, using the...
Page 28
Configuration M200 Mk2 Intelligent Audio Sources The M200 differentiates be- tween 3 type of audio sources: 1. Permanent sources 2. Semi-intelligent sources 3. Intelligent sources 1. Permanent sources 3. Intelligent sources In the case of permanent audio In the case of intelligent sources, including for example sources, it is a question of the Tuner source, the television...
Page 29
Configuration M200 Mk2 Setup #5 – AV Assignment 2. Assigning video inputs In the second step, a video input The following display appears, if from the television / HDMI a video input is called by one or Switcher is assigned to the se- more audio sources: lected M51/ M219 audio source, using the Input ±...
Page 30
Configuration M200 Mk2 Setup #5 – Function TV-Lift Relay activation Example: Settings definition – Setup #5 When assigning video inputs, you define at the same time which inputs should activate the relays if the TV-Lift function has been selected in Setup #2. If the audio source has no assignment and remains "disabled", the relay is not activated.
Configuration M200 Mk2 Setup #5 – Disable Disable assignment Reset assignment Using the Disable function, you If you want to return the settings can undo or disable the assign- in Setup #2 menu to the factory ment of an audio source to a settings, simply press and hold the Disable softkey until the video input.
Appendix M200 Mk2 Guarantee Included in delivery § The guarantee period is 24 M200 Domotic Interface months from the date of pur- § M51-Link cable ( 2 m ) chase. Your dealer should be your first § Serial PC cable contact if you need service.
Appendix M200 Mk2 Technical Data Relay: A - B Switching voltage max. 42 Volt Max. switching current with - Alternating current (AC): 8 Ampere (ohmic or inductive load) - Direct current (DC): 8 Ampere (ohmic load) 4 Ampere (inductive load) INPUT: A - B Max.
Revox system, the system address at the Loewe television and the remote control must be changed. The reason for this is as follows: Both Revox and Loewe use an RC5 code with the system address 00 for the television. For this reason, both systems will react to some of each other’s commands.
Page 36
English through the righthand channel. That cannot be changed. Using a special SCART cable, available from Revox under the Part no.: 54 429 110, the channel switching can be used correctly again. In this case, the lefthand and righthand sound channels are disconnected and supplied through the external audio output.