Table of Contents
Advertisement
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your
preference.
DVD
Setting procedure
VCD
CD
1
Press SETUP during stop.
The following on-screen display
SETUP
appears.
2
Move the cursor control ( / ) to select
a symbol for the setting you want to
change.
(See the next page.)
ENTER
Picture performance settings
Output sound settings
Language settings
Display settings
Operational settings
Initial settings
54
Picture
TV Shape
4:3 LB
Blacker than Black
Off
Setting : Interlaced
1
3
Move the cursor control ( / ) to select
the setting you want to change, then
press ENTER.
ENTER
4
Change the selection by the cursor
control ( / ) or other buttons, by
referring to the corresponding pages
, then press ENTER.
56
ENTER
5
Repeat steps 3 and 4 to change other
settings.
To select another operation, go back to step 2.
6
Press SETUP.
The on-screen display disappears.
SETUP
To return to the previous display
Press RETURN.
RETURN
Notes
• The on-screen display disappears when you press the
SETUP button.
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.
1, 6
2, 3, 4
RETURN
Advertisement
Table of Contents
