Table of Contents
Advertisement
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To OPTICAL
type digital
audio input
Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an
amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's
owner's manual and set the amplifier so you can enjoy Dolby Pro Logic
Surround sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
*
Dolby Pro Logic Surround
To COAXIAL
type digital
Connect either.
audio input
75
coaxial cable
Optical digital cable
To audio input
To 2CH AUDIO OUT
Audio cable
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
Y
P
B
P
R
S
VIDEO COAXIAL
OPTICAL
"Audio Out Select"
BITSTREAM/PCM
VIDEO OUT
AUDIO OUT
AUDIO OUT
2CH
5.1CH SURROUND
FRONT SURROUND CENTER
L
R
SUBWOOFER
Recording system
To
BITSTREAM
/PCM
AUDIO OUT
• Make the following setting.
On-screen display
"Audio Out Select"
Be sure to set "Audio Out Select"
to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic
Surround using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
Y
P
B
P
R
S
VIDEO COAXIAL
OPTICAL
BITSTREAM/PCM
VIDEO OUT
AUDIO OUT
AUDIO OUT
2CH
5.1CH SURROUND
FRONT SURROUND CENTER
L
R
SUBWOOFER
Select:
Page
54
"Bitstream"
57
D
42
Select:
Page
54
"Analog 2ch"
57
21
Advertisement
Table of Contents
