Altering The Charcoal Filter Operating Hours Counter; Reading The Filter Operating Hours Counter - Miele DA 6708 D Operating And Installation Instructions

Operation (automatic and manual modes)
Altering the charcoal filter operating
hours counter
You can set the operating hours counter
to suit the type of cooking you do.
It is set at the factory for 180 hours of
use before it needs to be replaced.
 Switch off the fan and the lighting.
 Touch the run-on control  and the
charcoal filter control  at the same
time.
The charcoal filter symbol  and one of
the fan power settings will flash.
The fan power setting indicators 1 to B
show the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
B ......................................... Deactivated
 Touch the relevant control to select
the duration required.
 Confirm the selection by pressing the
charcoal filter touch control .
All the indicator lights will go out.
If you do not confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
28
Reading the filter operating hours
counter
You can check the percentage of time
set already used before the filters need
replacing.
 Switch the fan on with the On/Off
touch control .
 Press and hold the grease filter
control  or the charcoal filter
control .
One or more of the power setting
indicators will flash.
The number of flashing indicators
shows the percentage of the operating
time which has already been used up.
1 ................................................... 25 %
1 and 2 ........................................ 50 %
1 to 3 ........................................... 75 %
1 to B ......................................... 100 %
The number of operating hours used
remains in the memory even when the
appliance is switched off or there is a
power cut.