Table of Contents
Advertisement
Connecting to an audio system and TV equipped with ColorStream
Signal flow
VIDEO OUT
VIDEO
Y
P
P
B
R
R
L
BITSTREAM/
S
PCM
ANALOG
(red)
(white)
To ANALOG
AUDIO OUT
To audio inputs of
the amplifier
(red)
(white)
Audio system
ColorStream
®
(Component video) outputs/inputs
Some TVs or monitors are equipped with component video inputs. Connecting to
these inputs allows you to enjoy higher quality picture playback.
Actual labels for component video inputs may vary depending on the TV
manufacturer. (ex. Y, R-Y, B-Y or Y, C
In some TVs or monitors, the color levels of the playback picture may be reduced
slightly or the tint may change. In such a case, adjust the TV or monitor for
optimum performance.
Notes
• Refer to the owner's manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player's power cord. If you leave the amplifier power
on, the speakers may be damaged.
AUDIO OUT
To P
To P
To Y
R
B
VIDEO
VIDEO
VIDEO
OUT
OUT
OUT
, C
)
B
R
®
(Component video) inputs
AC IN
To Y video input
To P
video input
B
To P
video input
R
TV or monitor with
component video inputs
• Make the following setting.
On-screen display
"Audio Out Select"
To wall outlet
Select:
Page
35
"Analog 2ch"
39
17
Advertisement
Table of Contents
