Installing The Bolt-Down Kit - NetApp 42U 1280 mm System Cabinet Manual

7. Repeat the process for any remaining system cabinets.
8. Tighten all interconnect bracket screws.

Installing the bolt-down kit

You can secure the system cabinet to the floor by installing the optional bolt-down kit. Installing the
kit prevents the system cabinets from being rolled out of position.
Before you begin
You must supply the appropriate anchor bolt for your floor for each bolt-down bracket.
Steps
1. Mark the area on your floor where the system cabinet will be installed, and then roll the cabinet
into place.
Installing a system cabinet | 15