Advertisement
Quick Links
Advertisement
Related Manuals for Comino OTTO Series
Summary of Contents for Comino OTTO Series
- Page 1 OTTO Series QUICK START GUIDE CMNO LTD. 2019 OTTO MASTER. QUICK START GUIDE...
- Page 2 Requests for authorisa- tions shall be directed in writing to the publisher at the address given below. CMNO LTD Ioannis Stylianou, 6 info@comino.com Floor 2, Flat 202 www.comino.com 2003, Nicosia Cyprus +357 25262933 OTTO MASTER. QUICK START GUIDE...
-
Page 3: Table Of Contents
OVERVIEW INTRODUCTION 1.1 PRODUCT ELEMENTS UNPACKING AND CHECKING THE CONTENTS SETTING UP STARTING UP THE DEVICE ADJUSTING SYSTEM HOW TO FILL A COOLANT OTTO MASTER. QUICK START GUIDE... -
Page 4: Introduction
Congratulations on purchasing your COMINO OTTO Professional Computer. We are pleased to welcome you as our customer. This manual contains all safety information and instructions necessary for using your COMINO OTTO Professional Computer. Before using your device, please familiarize yourself with all relevant in- formation. -
Page 5: Product Elements
INTRODUCTION PRODUCT ELEMENTS (see Pic.1) I/O Ports* Power cable Magnetic side panels Reservoir Type-C USB On/Off button * — may vary depending on a model. Pic.1 OTTO MASTER. QUICK START GUIDE... -
Page 6: Unpacking And Checking The Contents
UNPACKING AND CHECKING THE CONTENTS Put the box the right way, cut the adhesive tape on the box with an office knife Check if the package contains all of the components ordered Take Otto out of the box, properly holding its handle (see Pic.2) Pic.2 OTTO MASTER. - Page 7 UNPACKING AND CHECKING THE CONTENTS Place OTTO on an even horizontal surface (see Pic.3). Pic.3 If you want to place OTTO in a vertical position, use the included stand. Carefully insert the wires into the stand holes, place the power cord into its slot and put OTTO on the stand (see Pic.4).
-
Page 8: Setting Up
SETTING UP Before starting up your device for the first time, check: • connection of all cables • coolant fullness • there are no leaks • all fluid ports are closed • ventilation openings are not blocked • monitor and peripheral cables are connected •... - Page 9 SETTING UP OTTO MASTER HDMI DisplayPort VirtualLink USB 3.1 Type-C Optical S/PDIF HDMI 2.0 LAN (RJ45) USB 2.0 ASUS Wi-Fi GO! DisplayPort Audio jack(s) USB 3.1 OTTO SUPER HDMI (HDCP sup.) USB 3.1 DisplayPort (Native) (DisplayPort 1.4) Audio jack(s) HDMI Output (Native) ASUS Wi-Fi GO! (HDMI 2.0b) LAN (RJ45)
-
Page 10: Starting Up The Device
STARTING UP THE DEVICE STARTING UP THE DEVICE To run OTTO, press the On/Off button on the device case (see Pic.6) SHUTTING DOWN THE DEVICE press the On/Off button on the case or via OS (see Pic.6) On/Off button Pic.6 OTTO MASTER. -
Page 11: Adjusting System
ADJUSTING SYSTEM To control and adjust OTTO’s voltage, temperature and fan speed info use Fan Xpert tool, which is a part of ASUS AI Suite. AI Suite software product is developed for Asus motherboards. This utility allows to use predefined cooling system settings, which is manageable on this PC. -
Page 12: How To Filla Coolant
HOW TO FILL A COOLANT 1. Make sure that no power is supplied to OTTO and the power cord is not plugged into the power socket. 2. Put OTTO on its left or right side. 3. Remove the magnetic side panel. 4. - Page 13 HOW TO FILL A COOLANT 10. Open the lid with a hex wrench. Carefully pour the coolant into the fluid port until the level again. No liquid must be spilt inside the device! liquid 12. Close the lid with a hex wrench and place OTTO in its normal position.
- Page 14 CMNO LTD Ioannis Stylianou, 6 Floor 2, Flat 202 2003, Nicosia Cyprus info@comino.com www.comino.com OTTO MASTER. QUICK START GUIDE...
Need help?
Do you have a question about the OTTO Series and is the answer not in the manual?
Questions and answers