Enjoying Dolby Pro Logic Surround Sound - Toshiba SD 3755 Owner's Manual

PAGE 16 CONNECTIONS
Connecting to Optional Audio System (Cont'd)

Enjoying Dolby Pro Logic Surround Sound

Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding.
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
G
With a receiver equipped with Dolby Digital
Connect the equipment the same way as described in "Enjoying Dolby Digital Sound" on the previous page. Refer to the
receiver's owner's manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to "Selecting Digital Audio Output" on page 40).
To VIDEO OUT
Connection example
Receiver equipped
with Dolby Pro
Logic Surround
Front
speaker
(left)
Rear speaker
Video cable
To video input
(left)
To AUDIO OUT
Audio cable
To audio input
Center speaker
TV
Rear speaker
(right)
Subwoofer
(Optional)
Front
speaker
(right)