Toshiba P200 Series User Manual page 121

LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
The Wake-up LAN function is not supported on battery power in Hibernate/
Power off mode, before you plan to use this function please make sure
your AC power source is properly connected to the system.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
User's Manual
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
Enables Built-in LAN function (Default).
Disables Built-in LAN function.
HW Setup
8-4