E: Ethernet - Toshiba HD-EP30KB Owner's Manual

Preparation (Continued)

E: Ethernet

Perform this setting if you connect the player to your LAN (
After performing this setting, you need to turn off this player and turn it on again to activate this setting.
If you do not connect, skip to Step 20.
18
Press / to select "Ethernet", then press OK.
19
Press / to select each of the followings, then press OK.
DHCP
Proxy Setting
MAC Address
NTP Server
56kbps Modem
Network Speed
Cookie Setting
1 DHCP
1 Set "DHCP" to "On" and
press OK button.
The network information is
automatically set.
2 Set "DNS" to "On" and
press OK button.
The DNS server is obtained
automatically from the
DHCP server.
3 Select "Confirm", then
press OK button.
Confirming starts.
If the setup is successful,
an IP address appears.
Press OK button.
If the setup is not successful:
a) Set "DHCP" to "Off" and
press OK button.
b) Input the addresses using the number buttons.
"IP Address"
"Subnet Mask"
"Gateway"
"DNS Server"
c) Select "OK" and press OK button.
22
HD-EP30KE_Eng.indd 22 HD-EP30KE_Eng.indd 22
Off
To set your network information.
1
Off
To input proxy server address (when your provider requires the setting).
2
Off
Off Off
To display the Mac address of the player. (Fixed. No need to set.)
3
To adjust the player's clock via the network time protocol.
Accept
4 To select the speed according to the specification of your LAN.
To select whether you access "Cookies" or not.
5
DHCP
On Off
DHCP
IP Address
0 . 0 .
Subnet Mask 0 . 0 .
Gateway 0 . 0 .
Skipped when "DHCP"
is set to "On".
Gateway
0 . 0 .
DNS On Off
DNS Server
0 . 0 .
Confirm
OK Cancel
Skipped when "DNS"
is set to "On".
DHCP
On Off
DHCP
IP Address 192
. 168 .
Subnet Mask 255 . 255 255 .
Gateway 192
. 168 .
DNS On Off
DNS Server 192 . 168 .
Confirm
OK Cancel
This sets a different address within the
same subnet of the PC on your network.
e.g. if the IP address of the PC is
192.168.1.10, set 192.168.1.15 (or some
other unused address.)
This sets the subnet mask of the network
environment that will be connected.
e.g.: 255.255.255.0
This sets the gateway used by the player
(e.g.: 192.168.1.1).
This sets the DNS server to be used by the
player (e.g.: 192.168.1.1).
page 17).
2 Proxy Setting
Enter the proxy server address when your provider
requires proxy setting.
0 . 0
0 . 0
1 Set "Proxy" to "On" and
0 . 0 press OK button.
2 Enter the specified data
from the provider.
0 . 0
Refer to the instructions
below for inputting
0 . 0
characters. (Server, Port)
OK button
/ buttons
buttons
/
CLEAR button
1 . 15
Number buttons
. 0
1 . 1
1 . 1
3 NTP Server
Select "On" or "Off" and press OK
button.
"On" The player automatically
accesses an internet server
to adjust time protocol.
"Off" The player does not access
an internet server
to adjust its clock.
Proxy Setting
Proxy On Off
Server
Port 0
OK Cancel
3 Select "OK" and press
OK button.
How to input characters
To begin or finish input.
To select a character.
To move to the next character.
To erase to correct.
To input a number.
NTP Server
On
Off
07.9.3 2:01:52 PM 07.9.3 2:01:52 PM