Midi - Eowave Quadrantid Swarm Manual

has its own VCA controlled by the touch key.

MIDI

By default the QS responds to MIDI channel 1. To change the MIDI channel simply press SHIFT while
powering up the unit. Send a note on the new midi channel, and press START to validate your choice. The
new MIDI channel will be stored in the internal memory.
By pressing the 8​ th​ key (noise) you can also activate the external MIDI clock.
It will be available at the clock output.
The QS also responds to MIDI CC for a couple of parameters;
CC1 to CC6 will add some modulations to lfo Speed, spread, fold, perc, attack and decay. The CCs are
added to the current potentiometer value.