Table of Contents
Advertisement
(JK-H01A top housing install)
(6) Move the two support arms inside. Fig-2
(7) Remove knockout in the center of the housing
and let the cable pass through.
(8) Put the video cable, power cable, and the
communication cable inside the housing from
the hole on the topside.
(9) Insert the camera housing into the ceiling. Push
out the support arms so that they hold onto the
ceiling. Fig-3
(10) Tighten the two support arm screws to secure
the camera housing to the ceiling. Fig-4
Lock
screw
Support Arms
- 35 -
Support
Arms
Fig-2
Support wire
is fixed here
Fig-3
Fig-4
Lock
screw
Advertisement
Table of Contents
