Flow Limiter; Flue Gas Emissions Test - Viessmann Vitopend 100-W Installation And Service Instructions Manual

Further details regarding the individual steps

Flow limiter

A

Flue gas emissions test

Boiler flue connection bend for 18,
22, 24 and 30 kW
A
1. Connect the flue gas analyser to
test port A.
2. Open the gas shut-off valve. Start
the boiler.
Commissioning, inspection, maintenance
If required, flush flow limiter A with
clean water.
Identification of flow limiter A
Rated heating output
18 kW
22 kW
24 kW
30 kW
36 kW
2.
1.
Boiler flue connection bend for 36 kW
3. Set the upper heating output (see
page 49).
Measure the CO
content. Record the value in the
enclosed "Guarantee card".
(cont.)
Colour
White
White
Blue
Red
Pink
A
or O and CO
2 2
59