Learning About The Remote Control - Toshiba 34HFX84 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote
Control functional key chart" on pages 17–18.
turns the TV on and off
POWER
allows access to the automatic TV shut-off function (page 59)
SLEEP
The first press of the LIGHT button lights the keypad and turns
LIGHT
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
allow direct access to channels (page 26)
Channel Numbers (0-9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds (page 20).
cycles through the five pictures sizes: Natural, Theater Wide 1,
PIC SIZE
2, 3, and Full (page 31)
allows access to the favorite channel search function (page 37)
FAVORITE
allows access to on-screen programming menus (page 24)
MENU
sets programming menu information (page 24)
ENTER
select or adjust programming menus (page 24)
yz x •
cycles through favorite channels (page 29)
FAV yz
cycles through programmed channels (page 27)
CH yz
adjusts the volume level
VOL yz
exits the programming menus (page 24)
EXIT
selects the video input source (page 49)
INPUT
mutes the sound (page 53)
MUTE
displays on-screen information (page 59)
RECALL
returns to the last viewed channels (page 28)
CH RTN
selects the POP (picture-out-picture) channel (page 35)
POP CH yz
turns the POP feature on and off (page 35)
SPLIT
allows access to the programmed channel search function (page 37)
CH SCAN
freezes the picture. Press again to restore the picture.
FREEZE
switches the main and POP pictures (page 36)
SWAP
allows direct access to POP channels (page 35)
POP DIRECT CH
selects the POP picture source (page 35)
SOURCE
Note:
The error message "Not Available" will appear
if you press a key for a function that is not
available.
23