Lincar Alice 480N Using Instructions And Maintenance page 28

LOADING - TO RESTART WITH EMBERS ( Moderates flames )
In case of starting with embers, go on as follows :
Thicken the embers in the middle of the foyer .
•
Open totally the prime air.
•
Wait few minutes till in the brazier appears a flame sufficient for a new starting.
•
Load some wood pieces and wait for the complete starting.
•
Replace the prime air in the normal position as indicated in the chapter "Regulations".
•
SHAKING FOYER GRATE (Fig.1 – Fig.2)
Open the ash door using the thermic glove and employing the poker, shake the grate of
•
the foyer. The ash will fall down into the ash drawer and the foyer will be always clean
and ready for next wood loading.
ASH DRAWER
The ash drawer should be emptied from ash using the thermic glove. The ash drawer
•
emptying should be done when the stove is cold.
The ash drawer is placed under the foyer, to reach it, it's necessary to open the ash door.
•
The emptying of ash drawer must be done when the stove is completely cold. Be careful
•
to the presence of ambers or warm pieces.
Do not forget to insert the ash drawer in its place. The functioning of the stove without
•
the ash drawer has to be considered dangerous.
Please employ the thermic glove in case of ash drawer's emptying when the stove is still
•
warm.
Ash shaker
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 470-480LZ-490LZ-480N-490N
GB GB FR FR ES ES
28/64
Ash
Drawer
Fig. 2