Connecting Two Vcrs - Toshiba 32AFX61 Owner's Manual

(Continued from previous page)
From Antenna
Stereo VCR
IN from ANT OUT to TV
CH 3
CH 4
TV
ANT( 75 )
AUDIO CENTER
CHANNEL IN
ANT-1 OUT ANT- 2
Satelite IN
S-VIDEO
DVD Player with ColorStream™

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono
VCRs)
• two video cables (two S-video cables for S-VHS VCRs)
VCR 1
From Antenna
IN from ANT OUT to TV
TV
ANT( 75 )
ANT-1 OUT ANT- 2
VCR 2
CH 3
CH 4
8
32/36AFX61(E)
VIDEO AUDIO
L R
IN
OUT
OUT
VAR
S-VIDEO R L
AUDIO
ON OFF
VIDEO
Y
VIDEO
L/
L/
L MONO
C B
MONO
AUDIO AUDIO
AUDIO
C
R
R R R
COLOR
STREAM
VIDEO 1 VIDEO 2
IN DVD IN OUT
AUDIO
OUT
L L
Y C C
B R
R R
VIDEO
COMPONENT VIDEO
OUT
VIDEO AUDIO
L R
IN
OUT
AUDIO CENTER
S-VIDEO
CHANNEL IN
ON OFF
VIDEO
Y
L/
C
B
MONO
AUDIO
C
R
R
COLOR
STREAM
VIDEO 1 VIDEO 2
IN DVD IN
VIDEO AUDIO
L R
IN
OUT
Note:
For the highest possible picture quality, you must use
the ColorStream (component video) connections between
the TV and DVD player. Connect the ColorStream cables
from the DVD player to the jacks marked "ColorStream"
on the TV.
The ColorStream input on the TV is for use with DVD
players that offer interlaced (480i) scanning ONLY. If you
have a progressive scan (480p) DVD player, you
must switch the DVD player to interlaced (480i)
mode first, and then connect it to the TV's ColorStream
jacks. Failure to do this will cause unacceptable
picture performance.
Connection of a high definition set-top receiver box is
permitted only if the output is switched to the interlaced
(480i) scan mode. This TV will not accept or display
progressive scan (480p/720p) signals or 1080i
interlaced high definition signals.
If your DVD player is not component video compatible,
use the S-video connections (both audio and video)
instead of the ColorStream connections.
Do not connect both S-video and ColorStream cables
between the TV and DVD player at the same time. Doing
so will distort the picture.
To record, set the VCR to Line IN. To monitor recording,
set the VCR to Line IN and the TV to Video-1.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.
CH 3
CH 4
Note:
Do not connect the same VCR to the output
OUT
VAR
R L
AUDIO
and input jacks on the TV at the same time.
**
If you have S-VHS VCRs, use S-video cables
VIDEO
L/
L
MONO
(in the S-video jacks) instead of regular video
*
AUDIO AUDIO
cables. Do not connect both a regular video
R R
cable and an S-video cable to Video-1 (or
OUT
Video-2) at the same time.
To dub or edit, VCR 2 must select Line IN,
and the TV must select Video-1.
The Audio OUT jacks can output the sound
*
of either the Main or PIP picture (see
"Selecting the Audio OUT sound" on page
45).
The Video OUT jack does not output the
**
PIP picture.