Using The Preview Function; Using The Favorite Function; Using The Strobe Function - Toshiba 32AFX61 Owner's Manual

Using the preview function

Press INFO to scan the channels you previously programmed into the
TV's memory (see "Adding channels to the TV's memory" on page
23). A 6-picture multi-window scan will start.
7 9 12
4 6
To cancel the preview function:
Press INFO again.

Using the favorite function

1. Press FAVORITE to scan the channels you previously
programmed into the TV's memory (see "Programming your
favorite channels" on page 25).
A 9-picture multi-window scan will start.
The first window will display as a moving picture.
2. Press y z x • to select the channel you want to watch. The
selected channel will display as a moving picture in the 9-picture
multi-window.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
6 7 7
12 18
42 97
Each time you press FAVORITE, the display will change in the
following order:
FAVORITE CH1— FAVORITE CH2 — Off
To cancel the favorite function:
Press FAVORITE again.

Using the strobe function

Press MULTI to start the strobe function. A 9-picture multi-window
strobe starts for the current main picture.
For example, you can strobe the action of the TV program you are
watching, or view a decisive moment of a sports program that was
previously recorded.
To cancel the strobe function:
Press MULTI again.
30
32/36AFX61(E)
15
9
X
33
106
INFO
FAVORITE
ENTER
yzx •
MULTI
Note:
• A program or channel you set up as
blocked in the Locks menu may not always
display as blocked during INFO (preview)
or FAVORITE multi-window scanning.
When blocked properly, the program will
appear as a black window with an "X"
under the channel number.
• The preview (INFO) function does not
work when ANT 2 mode is selected.
• The INFO (preview), FAVORITE, and
MULTI (strobe) functions do not work
when the main picture source is
ColorStream.