Changing Humidity / Temperature Sensor; Installation Figure (Electrical Connections) - Tenmars TM-187A User Manual

5.12 Changing humidity / temperature
sensor
Before changing the humidity / temperature sensor,
please disconnect all power, follow the instructions in the
user's manual and operate in a safe environment.

Remove the screws and protection cap

Remove the old sensor

Take out the new sensor and install it according to
the direction illustrated in the figure

Install the protection cap and screws

Restart and set the ADJ settings to disabled or reset.
5.13 Installation figure (Electrical
connections)
TM-185A TM-187A
12