Alarm Mode - Tenmars TM-187A User Manual

5.10 Alarm mode

LED position
Top row
Bottom-left
row
Bottom-right
row
LED position
Top row
Bottom-left
row
Bottom-right
row
When Alarm mode is started, the indicator will
automatically light up when "displayed test value" ≧
"alarm value"; the buzzer or dry contact setting will also
start if set as enabled.
If a threshold value is set, it will automatically stop when
"alarm value + threshold value" ＞ "displayed test value".
When the "displayed test value" is once again ≧ "alarm
value", it will automatically start again without the need to
reset it.
If no threshold value is set, press any button to reset the
alarm; if alarm is disabled, Alarm setting must be
restarted.
TM-185A TM-187A
Description
Alarm stalls
Start/Stop (Default Stop)
Alarm value
(Default 25ºC; 50%RH; 1500 PPM)
Description
Alarm OFF difference range
Start/Stop (Default Stop)
Threshold value (Default 0)
10