Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba 32A61 Owner's Manual

Connecting a cable converter box

This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
From Cable
COLOR
STREAM
INPUT
L
AUDIO
R

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to video
mode. Tune the VCR to channel 3 or 4 (the same channel as the cable
box output switch). Use the cable convertor box to change channels.
The PIP source should be set to TV mode. (see page 24)
You will need:
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
• cable splitter
cable converter box
TV
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R
Stereo VCR
VIDEO
ANT (75Ω)
ANT-1 OUT ANT-2
DVD IN OUT IN
VIDEO VIDEO 2 VIDEO 1
Y
VIDEO
L
MONO
Pb L/MONO
S VIDEO
AUDIO
AUDIO
Pr
R R
IN OUT
cable converter box
From Cable
cable splitter
OUT
ANT (75Ω)
ANT-1 OUT ANT-2
OUT IN
VIDEO VIDEO 2 VIDEO 1
Y
VIDEO
L
MONO
L/MONO
Pb
S VIDEO
AUDIO
AUDIO
Pr
R R
AUDIO
L R
IN
IN from ANT OUT to TV
CH 3
OUT
CH 4
9
Caution:
IN
If you have a mono VCR, connect L/Mono to
OUT VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.