English - FIBARO HEAT CONTROLLER Quick Manuals. Warranty Terms

ENGLISH

FIBARO The Heat Controller is a HomeKit-enabled
thermostatic head to control temperature in
your room using Bluetooth
technology.
It measures the temperature and automatically
adjusts the heat level. It can be mounted without
tools on three types of thermostatic radiator valves.
You can create schedules via app to easily manage
temperature throughout the week.
TIP: Check corresponding chapters of Quick Start
Guide for pictures.
Package contents (page 3):
• Thermostatic head,
• 2 adapters (for Danfoss RTD-N and RA-N valves),
• Maintenance key,
• Extra temperature sensor (optional),
• Manuals and warranty terms.
Download FIBARO app from the App Store (page 4).
First launch (page 5):
1) Connect the charger to the micro-USB port to
charge the device (Fig. 1).
2) Disconnect the charger when the LED ring pulses
green (device fully charged) (Fig. 2).
3) Dismount your current thermostatic head (Fig. 3).
4) Depending on type of your valve proceed normal-
ly or use adapter (Fig. 4).
5) Mount the device on the valve and tighten it by
turning the cap clockwise (Fig. 5).
6) Use the included key to click the button (Fig. 6).
7) Open the FIBARO app and tap
8) Application will guide you through the installa-
tion and pairing process.
Setup Code:
You will find the Setup Code on the device's housing
and on the back of the Quick Start Guide.
Reset (page 7):
1) Use the included key to press and hold the but-
ton. When the LED ring glows yellow, release the
button (Fig. 8).
2) Click the button again immediately to confirm.
3) The device will be put in Standby Mode. Click the
button to activate it again.
®
low energy wireless
icon (Fig. 7).
IMPORTANT: Read the full manual
before attempting to use the device!
For more information about the
device, like video guides, param-
eters, technical manuals, and
declarations visit our website:
manuals.fibaro.com/en/hk-heat-controller
Specifications (thermostatic head):
Power supply:
Supported charger:
Radio protocol:
Radio frequency band:
Operating temperature:
Maximum water temperature:
Supported valves:
Dimensions (D x L):
EU directives compliance:
Specifications (sensor - optional):
Power supply:
Radio frequency band:
Operating temperature:
Dimensions (D x H):
EU directives compliance:
Warnings:
Failure to observe recommendations included in the
manual may cause risk to health or malfunction of the
device. The manufacturer, Fibar Group S.A. will not be
held responsible for any loss or damage resulting
from not following instructions of the manuals.
Using batteries other than specified may result in
explosion. Dispose of properly, observing environ-
mental protection rules.
This product is not a toy. Keep away from children and
animals! CR2032 coin cells are harmful if swallowed!
5
3.7V Li-Poly battery pack
(non-replaceable)
micro-USB 5V, min. 0.5A
Bluetooth ® low energy
2.4 GHz
0-40°C
M30 x 1.5, Danfoss RTD-N,
Danfoss RA-N
56 x 74 mm
56 x 87 mm (with adapter)
RED 2014/53/EU
RoHS 2011/65/EU
3.0V CR2032 battery
(included)
2.4 GHz
0-40°C
38 x 12 mm
RED 2014/53/EU
RoHS 2011/65/EU
90°C