Blocking Programs By Ratings - Toshiba 27A34 Owner's Manual

3. Press or
CH
PICTURE AUDIO SETUP
V-CHIP
BLOCKING
PIN CODE
SELECT [0-9]
END EXIT
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
CH
PICTURE AUDIO SETUP
V-CHIP
ENABLE BLOCKING
SET RATING
BLOCKING OPTION
NEW PIN CODE
SELECT
5. You may now enable blocking. See "Blocking programs by ratings"
(below), "Locking channels" (page 19), "To change your PIN code"
(below), or "Blocking unrated movies or programs" (page 19).
To change your PIN code:
1. Press MENU, then press
2. Press or
3. Press or
4. Use the Channel Number buttons (0-9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press or
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
7. Press EXIT to return to normal viewing.

Blocking programs by ratings

The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
3N42501B[E] (P14-25) 16
to display the V-CHIP menu.
OPTION
RESET
SET ENTER
OPTION
ON OFF
START
START
START
ADJUST
or to display the OPTION menu.
to highlight V-CHIP.
to display the V-CHIP menu.
to highlight NEW PIN CODE and press
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and resets your PIN code.
or to
16
24/2/04, 10:56 AM
Channel
Numbers
Recall
Exit
Menu/
Enter