Setting The Language; To Memorize Channels; To Add/Delete Channels; Automatic Channel Memory - Toshiba 20A43 Owner's Manual

SETTING THE LANGUAGE

This TV can display the on-screen displays and adjustment menus in English, Spanish, or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select the language you prefer first, then proceed with the other menu options.
1
Press MENU.
2
Press SET + or – to select the
LANGUAGE mode, then press
ENTER.
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not
be affected by the language selection.

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV's
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator next
to "TV/CABLE" begins to flash.
4
Press ENTER to select the TV or
CABLE mode. The arrow indicates the
selected mode.
5
Press MENU repeatedly until the
MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.

AUTOMATIC CHANNEL MEMORY

1 Press MENU.
Press SET + or – until the indicator next
2
to "CH SETUP" begins to flash, then
press ENTER.
3 Press SET + or – until the indicator next
to "AUTO CH MEMORY" begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
4
Press MENU repeatedly until the MENU screen is
cleared.
8
3
MENU
CH SETUP
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / – / ENTER / MENU 〉
4

TO ADD/DELETE CHANNELS

1
2
3
MENU
CH SETUP
4
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / – / ENTER / MENU 〉
5
TV CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
MENU
CH SETUP
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
6
〈 + / – / ENTER / MENU 〉
TV CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
Press SET + or – until the " A " indi-
cator points to the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
Press MENU repeatedly until the
MENU screen is cleared.
Press MENU.
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
Press SET + or – until the indicator
next to "ADD/DELETE" begins to flash,
then press ENTER.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0-9), CH +
or – or SET + or –.
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. To delete the channel from
memory, press ENTER repeatedly until
"DEL" appears on-screen. The channel
indicator will change from green to red
when a channel is deleted. Repeat
Steps 4 and 5 for each channel to be
added or deleted.
Press MENU repeatedly until the MENU screen is
cleared.
LANGUAGE / IDIOMA / LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
〈 + / – / ENTER / MENU 〉
MENU
CH SETUP
PICTURE
AUDIO
LANGUAGE
V-CHIP SET
LOCK
ON TIMER
〈 + / – / ENTER / MENU 〉
TV CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / — / ENTER / MENU 〉
ADD CH 012
〈 0 – 9 / + / – / ENTER / MENU 〉