Anntenna/Cable Tv Connection - Toshiba 19A20 Owner's Manual

Antenna/Cable TV Connection
You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels.
Channels 2 - 13 are VHF channels, and channels 14 - 69 are UHF channels.
We recommend using an outdoor antenna for better picture quality.
You can receive Cable TV by connecting a cable supplied by your local cable company.
To connect an antenna or Cable without a decoder box
VHF, UHF
or Cable
VHF
UHF
To connect a Cable box or VCR
Follow this diagram if your cable company requires you to
connect a cable box.
Incoming
Cable
Cable box
When selecting channels in the cable box, first tune your TV
to the output channels of the cable box (usually 3 or 4).
4
F-type connector
(Not supplied)
75-ohm coaxial cable
OR
300-ohm twin-lead cable
Antenna adapter
(Not supplied)
OR
VHF
UHF
Back of TV
ANT
(75
ANT
(75
U/V mixer
(Not supplied)
Follow this diagram if you use a VCR.
Incoming
Cable
VCR
To watch video tapes, tune your TV to the output channel of
the VCR (usually 3 or 4), then begin viewing the video tape.
Back of TV
Back of TV
ANT
(75