Table of Contents
Advertisement
3. Faults and Damage
If there is any reason to suspect that the safety of
the unit has been affected then it must be immedi-
ately withdrawn from use and precautionary mea-
sures taken in order to prevent any further use.
It is recommended that the equipment be then
sent back to the manufacturers for testing.
The safety and integrity of the unit may
be compromised by, for example:
- External damage to the housing.
- Exposure to excessive loads.
- Incorrect storage of the unit.
- Damage sustained in transit.
- Correct certification is illegible.
- Functionality errors occur.
4. Safety Regulations
The use of the docking station DS x10 meets the
requirements of the regulations providing that the
user observes and applies the requirements as
laid down in the regulations and that improper and
incorrect use of the unit is avoided.
16
Advertisement
Table of Contents
