Content 1. Interduction 2. Safety Advice 3. Faults and Damage 4. Safety Regulations 5. General Satety Instructions 6. Tecnical Data 7. Function description / Operating Instructions 7.1 Content of delivery / order numbers 7.2 Installing ActiveSync 7.3 Synchronising with your PC 7.4 Ports 7.5 Connecting to a PC 7.6 Replacement of the contact board...
1 Interduction The docking station DS x10 is an USB docking station between the ecom i.roc x10 -Ex and a PC with an USB port for the use outside hazardous areas. All different i.roc x10 versions (41x, 51x, 61x) can be used.
- Correct certification is illegible. - Functionality errors occur. 4. Safety Regulations The use of the docking station DS x10 meets the requirements of the regulations providing that the user observes and applies the requirements as laid down in the regulations and that improper and...
5. General Safety Instructions - The device must not be brought into the Ex-area. - The device may be operated only with the designated LG x10 charger. 6 Technical data Ambient temperature: 0°C ..+45°C (32°F...113°F) Storage temperature: -10°C ..+60°C (14°F...140°F) Weight: ca.
# ET0002752 # A0002796 -contact board for adaptor -docking station i.roc x10 -USB cable complete set # AS002795 -docking station DS x10 -USB cable -adapter for i.roc x10 -contact board for adaptor 7.2 Installing ActiveSync Note: To ensure that synchronisation functions cor- rectly, Microsoft ActiveSync 3.7 or higher...
3. Follow the instructions given by the installation wizard. You can obtain additional information when installing ActiveSync by clicking on the Help button. 4. Once ActiveSync has been installed on the PC, connect the two devices using the docking station. Note: Microsoft Outlook 98 or higher must be installed on your PC to be able to synchronise emails with your i.roc x10 -...
Note: To synchronise files, drag the selected files from your PC into the synchronised folder on the i.roc x10 -Ex pocket PC. If when you created the partnership, you called the pocket PC "PC1", for example, the synchroni- sed folder will also be called "PC1". During the synchro- nisation process, the files are moved onto or from the i.roc x10 -Ex Pocket PC.
3. USB port for PC connection 4. port for charger LG x10 Note: Always connect the DS x10 docking station with an inserted and powered LG x10 charger before connecting to a PC or the i.roc x10 -Ex. 7.5 Connecting to a PC 7.5.1 Unscrew the adaptor from the backside of the...
7.5.3 Insert the i.roc x10 into the docking station. Note: When the i.roc x10 is connected correctly to the PC and mains voltage, it starts immedia- tely charging and establishing a connection. If this is not the case please check the cor- rect connection of the cables and refer to the part troubleshooting inside the i.roc x10 manual.
8 Repairs Repair work is subject to the nationally valid regula- tions and directives. We therefore recommend that such work be performed by ecom instruments GmbH, Germany, as all repairs must be examined to ensure functional and safety. 9 Cleaning, Storage / Maintenance - Only use a suitable cloth or sponge to clean the device.
Page 13
The above-mentioned guarantee conditions are the sole and only right of the purchaser to compensation, are exclusively valid and replace all other contract or legal warranty obligations. ecom Instruments GmbH accepts no responsibility for special, direct, indirect, accompanying or consequential damage as well as...
11 Declaration of EC conformity Herewith, ecom instruments GmbH declares that the product is in conformity with all applicable and necessary standards. Note: Further details regarding decleration of conformity and product information can be found at the downloadbutton on: http://www.ecom-ex.com...