Replacement Of The Contact Board - Ecom Instruments DS x10 Instruction Manual

7.5.3 Insert the i.roc x10 into the docking station.
Note:
When the i.roc x10 is connected correctly to
the PC and mains voltage, it starts immedia-
tely charging and establishing a connection.
If this is not the case please check the cor-
rect connection of the cables and refer to the
part troubleshooting inside the i.roc x10
manual.

7.6 Replacement of the contact board

During normal use the contact board has some
kind of abrasion. If you cannot connect between
i.roc x10 and docking station any more, please re-
place the contact board by srewing the adaptor off.
These contact board can be ordered separately.
22