Control Panel - Hafele 539.15.020 Installation - Use - Maintenance

BEVERAGE FRIDGE

CONTROL PANEL

Turning on the Appliance
To turn on the appliance, press the POWER button.
To turn off the appliance, press and hold the POWER button for 2-3 seconds.
When you use the Beverage fridge for the first time, restart the beverage fridge or
having been shut off for a long time, there could be a few degrees variance between
the temperature you select and the one indicated on the LED readout. This is normal
and once the beverage fridge is running for a few hours everything will be back to the
temperature selected.
Setting the Temperature Control
You can set the temperature as you desire by pushing the UP or DOWN button. When
you push the two buttons for the first time, the LED readout will show the original
temperature set at the previous time.
The temperature that you desire will increase 1 C if you push the UP button once, on
the contrary the temperature will decrease it if you push the DOWN button once.
.
Interior Light
You can turn the interior light ON or OFF by pushing the LIGHT switch.
You can also select, if you prefer the light switch to stay "ON" or "OFF" when the door is
closed. By pressing the LIGHT switch once or twice this will activate the desired
illumination on opening or closing i.e. the light stays on permanently when the door is
closed or comes on only when the door is opened. The tab at the bottom of the door
will activate the light on opening and closing.
NOTE:
If the unit is unplugged, power lost, or turned off; you must wait for 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time, the Beverage fridge
will not start.
When the door has been left open for more than 5 minutes the door alarm is activated.
If the door is continually left open, the compressor will stop and cooling will not
continue. This is a safety feature
.
7