Advertisement
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key from the key switch.
2
Removing the Existing Brake
Assembly
No Parts Required
Procedure
1. Lift the front of the machine and support it with jack
stands.
2. Remove the lug nuts that secure the wheel to the hub
(Figure
2).
1. Hub
2. Wheel
Figure 2
3. Lug nut
Figure 1
3. Remove the banjo bolt and washer from the
brake-caliper assembly, and remove the front brake line
from the brake-caliper assembly
1. Banjo bolt
2. Banjo washer
2
(Figure
3).
Figure 3
3. Front brake line
4. Brake-caliper assembly
Advertisement
