Table of Contents
Advertisement
Quick Links
eNet radio repeater in SCHUKO housing
eNet radio repeater in SCHUKO housing
Art. No. : FMR100SGWW
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Adapter plugs may not be connected in series and must be easily accessible.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
®
(1) SCHUKO
socket with increased contact protection
(2) Red status LED, covered
(3) Prog button
Intended use
-
Receiving and repeating eNet radio telegrams
-
Extending the range of radio transmitters and actuators
-
Indoor mounting in SCHUKO® socket or socket with ground pin
Product characteristics
-
Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
-
Repeating of all received radio telegrams or only of selected radio transmitters and
actuators
-
125 transmitters/actuators can be connected
-
Two repeaters are cascadable
82586533
J0082586533
Figure 1: Repeater
1/5
27.03.2017
Advertisement
Table of Contents
Related Manuals for Jung FMR100SGWW
Summary of Contents for Jung FMR100SGWW
-
Page 1: Safety Instructions
SCHUKO housing eNet radio repeater in SCHUKO housing Art. No. : FMR100SGWW Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. - Page 2 eNet radio repeater in SCHUKO housing Signalling of telegram repetitions, status LED flashes for 50 ms With server: Disabling of manual commissioning Function The repeater has two operating modes: Repeating of all received radio telegrams. No device may be connected to the repeater (as-delivered state) Repeating of the radio telegrams from selected devices.
- Page 3 eNet radio repeater in SCHUKO housing Disconnect all connections or reset repeater to default setting (see Disconnecting connection to a radio transmitter or actuator or Resetting repeater to default setting). i Radio transmitters and actuators can be connected to each other as described in the instructions of the radio transmitters and actuators.
-
Page 4: Technical Data
eNet radio repeater in SCHUKO housing The repeater is connected to the radio transmitter. The repeater and radio transmitter exit the programming mode automatically. i The telegrams of all function and scene buttons are repeated by multi-channel radio transmitters as soon as the first connection is established. Connecting repeater to actuator or energy sensor Press button Prog (3) for longer than 4 seconds. -
Page 5: Troubleshooting
Cause: Only the radio transmitter is connected to the repeater. Connect actuator to repeater. 5.3 Conformity Albrecht Jung GmbH & Co. KG hereby declares that the radio system type Art. No. FMR100SGWW corresponds to the directive 2014/53/EU. You can find the full article number on the device. The complete text of the EU Declaration of Conformity is available under the Internet address: www.jung.de/ce...
Need help?
Do you have a question about the FMR100SGWW and is the answer not in the manual?
Questions and answers