Table of Contents
Advertisement
ALARM SETUP
The Sensor and Output Window allows you to enable, disable and configure Sensors and Control Outputs.
Create & Name Sensor Presets
Open On-Screen Keyboard
Normally Open (NO) /
Normally Closed (NC)
Delay Triggering Relay Output
Configure Sensor Response
1.
Click the Setup Button on the Main Display Screen.
2.
Click the Alarm Setup Button to open the Sensor and Output Display.
3.
Click to select NO or NC for the desired sensor.
4.
Enter the Delay Time to define the number of seconds after the sensor is tripped until the relay is activated.
5.
Enter the relay(s) to associate with the sensor. Two or more relays can be associated with a single sensor – separate with
commas.
6.
Click Apply.
Configure Hybrid (IP) Sensors*
Assign Relay(s)
comma delineated
*
Requires the HVR Software Upgrade
51
Advertisement
Table of Contents
