Displaying Software Version Information
Use the direction keys to select "Settings" in the main menu and
confirm your selection with the OK button. Use the UP and
DOWN buttons to select the menu line "About & Version" from
the following menu and confirm your selection with the OK
button. The software version is displayed. Press the OK button to
return to the previous menu.
Operation
During normal operation the picture captured by the connected
camera(s) is displayed. In addition, the battery charging state, the
connection quality and the set sound volume are displayed.
Automatic Switching during Multi Camera Operation
Use the direction keys to select "Settings" in the main menu and
confirm your selection with the OK button. Use the UP and
DOWN buttons to select the menu line "Auto Switch Setting" from
the following menu and confirm your selection with the OK
button. In the following menu select "Switch Time". The factory
default setting for the switch time is 5 seconds. With the < and >
buttons you can set switch times of 5, 10 and 30 Seconds and
one minute. From the menu line "Exit" you can return to the
previous menu with the OK button.
Selecting a Camera during Multi Camera Operation
Use the direction keys to select "Quad Camera Operation" in the
main menu and confirm your selection with the OK button. In the
following menu you can now select one of the connected
cameras with the UP and DOWN buttons or have the views from
all cameras displayed in quad view. From the menu line "Exit"
Operation
25