Table of Contents
Advertisement
Before the First Use
Unpack all parts of the wireless CCTV system and dispose of the
packaging material or store them out of the reach of children.
There is a danger of suffocation for small children!
Before Mounting
Before permanently installing the system check if all parts
function correctly.
Please make sure a wireless connection from the desired
positions of the cameras to the desired position of the monitor
unit can be established. Thick walls and other structured can limit
the range of transmission significantly.
Pairing the Camera(s) with the Monitor Unit
Before the system can be used, the cameras must be paired with
the monitor unit. Up to four cameras can be operated in this way.
It is advisable to pair the cameras before they are finally installed
because you still have all components at hand. Attach the
antennas to the sockets on the backs of the cameras. The
antennas are simply screwed into the sockets.
1. Connect the monitor unit to the power mains with the included
power mains adaptor and turn it on with the ON/OFF switch.
2. Press the "Menu" button on the monitor unit.
3. Use the direction keys to navigate to the "Settings" icon
the menu and confirm with the OK button.
4. Select the line "Pair" in the following menu with the UP and
DOWN buttons and confirm with the OK button.
5. Select a Camera with the UP and DOWN buttons and press
OK, then press the Pairing Button (6) on the power connec-
tion of the respective Camera. The camera will now be paired
with the monitor unit under the selected number.
6. Repeat the process for each connected camera.
Operation
19
Advertisement
Table of Contents
