Toshiba RS-485 Installation Manual page 8
Usb to rs-485 converter port verification
Hide thumbs
Also See for RS-485:
- Operation manual (10 pages) ,
- Instruction manual (73 pages) ,
- User manual (8 pages)
Advertisement
4. Select "Device Manager", and a screen of "Device Manager" will appear as in
figure 12.
5. Click on the [+] that is next to the Port (COM & LPT). If you see "Toshiba Inter.
Corp. USB to RS485" appearing in the list, the USB/COM port is ready to use.
Otherwise, see trouble shoot in the user manual for more information.
NOTE:
-
MAKE SURE YOU ALWAYS USE THE SAME USB PHYSICAL PORT.
OTHERWISE YOU WILL NEED TO INSTALL THE DRIVER AGAIN.
-
MAKE SURE YOU SELECT 4-WIRE ON SW200. (BOTH OFF).
-
WHEN OPEN ASD PRO SELECT 4-WIRE COMMUNICATION.
Figure12: Device Manager screen
Advertisement
