Macintosh Operating Systems
Because there are currently no USB 2.0 drivers for the MacIntosh
OS, you don't need a special driver to use the XHub for Notebooks
with your Macintosh computer. (Your XHub for Notebooks will
operate at USB 1.1 speeds.)
Note: The drivers included on your XHub for Notebooks CD
will not work on your Macintosh computer.
To verify that the XHub for Notebooks is recognized by your
system:
1 Turn on your computer and connect your AUH-4100 (see
Plugging in Your XHub on page 4
2 Open the Apple System Profiler and check that
appears in Devices and Volumes under USB, as shown
Controller
in the example below.
for instructions).
USB2.0 Hub
Installing Drivers
7