Table of Contents
Advertisement
FirstCheck+ 1, 2, 3 & 5000
Diagnostics
Clock
Delay
Bump test
Slow charge
Fast charge
Ion Scie nce Lt d
The internal clock has failed.
Return the instrument to the manufacturer.
This symbol will appear during the manual adjustment and selection of
functions of the instrument. It indicates that data within the memory is
being moved. Please wait and the symbol will disappear after a few
seconds depending on the change bei ng made.
This symbol will appear on switch on if the Enable Bump Test setting has
been selected via the PC software (see page 30). The symbol is a prompt
that will appear once a week to remind the user to t e st the instrument
responds accurately when supplied with gas.
The instrument can be left connected to the charger indefinitely in this
mode of charge.
If fully discharged the instrument will take 9 hours to charge in this mod e
and pro rata for other initial states e.g. if half charged the instrument will
take around 4.5 hours to fully charge.
Page 41 of 53
Ion Science L td
______
Advertisement
Table of Contents
