Toshiba TX80 User Manual page 34

Using the Call Waiting Service
1. The call waiting tone is heard during a call.
2. Press J (Options).
3. Select Answer and press J (Select).
The original caller is placed on hold and a connection is
established with the second caller. Both names appear on the
display.
4. Press N to switch between callers.
Tip
• You can also place the original caller on hold and answer the call
from the second caller if you press
Stopping the Call Waiting Service
1. After Step 2 of “Starting the Call Waiting Service” (page 33),
select Deactivate and press J (Request).
After a network connection is established, the settings complete
screen appears.
Basic Operations
34
N after Step 1. n
Multiparty Call Service
This service allows you to call other parties during a call and then
switch between the parties or talk to multiple parties simultaneously.
A call with up to six people including yourself is possible. The names
and/or phone numbers of all the parties appear on the display during
the call.
1. Enter the phone number of another party you want to call during a
call and press N.
The original party is placed on hold and you can talk to the new
party.
2. Press J (Options) to perform one of the following operations.
Swap: Allows you to change the party of a private call.
Multiparty: Allows you to select the multiparty call state.
Mute My Voice: Mutes the outgoing sound.
Mute All: Mutes all the outgoing and incoming sound.
Contacts List: Allows you to refer to the Contacts list.
Call Log: Allows you to access the call log (page 30).
Voice Record: Records the other party’s voice.
My Details: Displays the owner information (page 47).
DTMF Off/On: Allows you to disable or enable the sending of
DTMF tones.
Note
• The options that are available vary depending on the call status.