ONE A Concise User Manual page 38

Concise User's Guide
Wireless Manager Application
The connection information is stored on the USIM
card supplied by the service provider (where this is not
the case you may need to create a profile - see the on-
line help).
PIN Number
The PIN number for your USIM card will be supplied
by your service provider. You usually have a limited
number of attempts to enter the correct PIN number.
1. Power on the 3.75G/HSPA module using the Fn +
combination.
2. Access the Wireless Manager application from the Start
menu (Start > All Programs > Wireless Manager > Wireless
Manager) or the desktop shortcut
3. You may be required to enter you PIN number and click OK.
4. Click the Connect
to be selected, and in most cases this will be pre-configured.).
5. The system will connect to your network.
6. Connected will appear above the timer icon (the timer will
indicate your connected time for the current session).
32 - 3.75G/HSPA Module (Option)

key
.
button (A Profile needs
7. You can then access the internet, download e-mail etc. as per
any internet connection.
8. Click the Wireless Manager notification area icon
the connection status, or wireless icon
Broadband Connection status
9. The indicator will display the signal strength and radio
access technology.
10. To disconnect from the service provider, click the Disconnect
button (note that if you click the close icon at
the top right of the screen the application will minimize to the
system tray, however the application will still be running; to
exit the application right-click the notification area icon and
click Disconnect or Exit Wireless Manager).
11. The program will disconnect from the service provider.
12. The module will still be on, and you will need to press the Fn +
key combination to turn it off.
13. If you are unsuccessful in connecting this way you may need
to add a profile with information provided by your service
provider (see the on-line help).
Figure 21
Wireless Manager
to view
to view the Mobile
.