ONE A Concise User Manual page 22

Concise User's Guide
Stereoscopic 3D Hardware Setup
This computer (Model D Computers Only) features a
built-in 3D IR emitter. The effective viewing angles of
the emitter are illustrated below. Make sure that you are
viewing the notebook screen within the area highlighted
below in order to get the proper stereoscopic 3D effect.
IR Emitter Location
Figure 10 -
16 - Video Features
3D Icon
IR Emitter Location
USB Connection & 3D Glasses
The light on the glasses will flash amber while charg-
ing, and solid amber when fully charged.
The glasses hold approximately 40 hours of viewing per
full charge. Flashing red indicates that less than 2 hours
of charge are remaining.
The indicator light displays for about 30 seconds after
turning the glasses on.
Viewing Angles
The emitter's horizontal viewing angle is 100 degrees.
The emitter's vertical viewing angle is 75 degrees.
75
Figure 11 - Emitter - Viewing Angles
