Page 1
CAUTION! - ELECTRIC TOY Not recommended for children under 8 years of age. As with all electric products, precautions should be obser- ved during handling and use to prevent electric shock. Manual Starter-Set 72999...
Page Table of Contents: 1. Safety Notes 2. Connections for the Locomotive Controller and the Track 3. Technical Data 4. Short Circuit or Overload 5. Trouble Running the Train 6. Cleaning and Maintenance 7. Disposing 8. Warranty...
1. Safety Notes Make sure you read the following safety notes before using a LGB power pack for the first time: • The power pack may only be connected to a wall outlet with voltage that is the same as indicated on the specifications plate on the power pack.
4. Short Circuit or Overload Overload Protection A built-in overload protection protects the power pack in the event of an overload or a short circuit. The locomotives will come to a stop, solenoid accessories cannot be controlled, and all lamps/lights con- nected to the layout will go out.
Page 5
Setup Putting track together Keeping track together Setting up track Wire connections for track The first time you set up the starter set, you can do it on a table or on the floor. Connecting track to the locomotive controller and the switched mode power pack Black White Blue...
Page 6
Connecting the switched mode power pack to the wall outlet Black White Blue INPUT max. 25V DC 0 - 20V DC max. Running the train INPUT INPUT INPUT max. 25V DC max. 25V DC max. 25V DC 0 - 20V DC max. 0 - 20V DC max.
5. Trouble Running the Train • If the train does not run, check to make sure that the batteries are correctly installed. If the batteries have been installed correctly, and the train still does not run, check the batteries in the remote control- ler too.