Toshiba GF632 Instruction Manual page 13

3.1.2 Appearance of Detector GF632
Separate
for Excitation cable
1/2 – 14 NPT
Ground terminal
for detector
Note: The ground cables are included in the package, so install them to flanges as shown in the Fig.4.5
as needed. (The screws are equipped to detector flanges.)
for Signal cable
1/2 – 14 NPT
Hanging hook
*Provided for upper 8 inch
(200mm to 600mm)
Flange
Ground cable*
Grounding ring
( Provided for PTFE lining only )
Figure 3.1.2 Appearance of Detector GF632
－ １２ －
Terminal Box Cover
Terminal Box
６Ｆ８Ａ０８８３
Flow direction arrow