Advertisement
EnglisH
10
Do not leave the cooling glove on the same area for more than
minutes.
Select the desired speed to switch on the appliance (Fig. 8).
-
Select speed 1 for areas with little hair growth and for areas where
bones are located directly beneath the skin, such as knees and ankles.
-
Select speed 2 for larger areas with stronger hair growth.
5
Stretch your skin with your free hand to make the hairs stand
upright.
6
For optimal results, place the appliance perpendicularly onto the
skin with the on/off slide pointing forward. Move the
appliance against the direction of hair growth at a moderate
speed (Fig. 9).
Make sure both the epilating discs and the massaging element are in
proper contact with the skin.
Make sure your skin is completely dry when you start epilating.
7
Press the appliance lightly onto the skin.
If you are not completely satisfied with the epilation result, try moving the
epilator more slowly over your skin.
Epilating without cooling glove
If you do not want to use the cooling glove, for instance because you
have grown accustomed to the sensation of epilation, you can also use
the appliance without the cooling glove.
1
For optimal results, place the appliance perpendicularly onto the
skin with the on/off slide pointing forward. Then move the appliance
against the direction of hair growth at a moderate speed (Fig. 9).
Epilating with the sensitive area cap (HP6483/HP6482)
Your epilator comes with a sensitive area cap that reduces the number of
active epilating discs. This makes the appliance suitable for epilating the
more delicate areas of the body, such as the underarms and bikini line.
1
Put the sensitive area cap on the epilating head (Fig. 10).
The sensitive area cap only fits onto the appliance in one way.
Advertisement
