BASE SPEAKER VOLUME SETTING
To adjust the base unit speaker volume, press
while speaking.
MUTE
To mute a conversation, press
To resume normal conversation, press
TONE/ENTERING A PAUSE
To
To temporarily switch to tone dial
(When the base is set to pulse mode)
To enter a pause within the dialing
sequence
INTERFERENCE OR STATIC
If you hear noise during a call, press
The TALK/BATT LOW LED blinks while changing a channel.
PAGING THE HANDSET
To locate the handset while it is off the
base, press
PAGE
beeps for 60 seconds.
To stop paging, press
key at the handset, or return the
handset to the base unit.
NOTE:
You cannot page the handset during a call.
MUTE
. The handset
PAGE
or any
BASIC OPERATION
VOLUME/+
during a conversation.
or
TALK
MUTE
Do this
Press
. The following numbers
TONE/
will be sent as tone dialing (See page 14).
Press
(See page 19).
RDL/P
to select another channel.
CH
or
VOLUME/–
.
PAGE
17