Troubleshooting - Xcruiser XDSR200HD User Manual

Problem
Does not work any button on
the front panel.
No Picture
Poor picture quality
No Sound
Remote Control does not
operate
No or Bad Signal
22
 Check the main power cable and check that it is plugged into a suitable power

outlet.
 See 'Does not display any message on the front panel'

 To match the STB system with your TV system (PAL/NTSC).

 
 Check that you have selected the Video Input on your TV.

 Press the STB button on the remote to assure you are controlling the STB and no 
other device with the remote.
 Check the brightness level of the TV.

 See 'No Picture' above. 
 Check the signal level, if this is low then tries adjusting the alignment of your dish.

 See 'No Picture' above.

 Check the volume level of the TV and STB. 
 Check the Mute status of the TV and STB.

 Point remote control directly towards the STB.

 Check and replace batteries.

 Check the LNB; Replace the LNB if necessary.

 Check the cable from the LNB.

 Check the position of the dish; realign dish if necessary.

 Check the 'Signal Level' and the 'Signal Quality'.

XDSR200HD
Solution
above.