Kitsound Hive2o User Manual

Kitsound Hive2o User Manual

Waterproof

Advertisement

kitsound.co.uk
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Kondor Ltd. is under license.
Other trademarks and trade names are those of their respective owners.
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner
is affiliated with KitSound or endorses the products herein.
Products showing the 'Crossed Through' wheelie bin symbol must be recycled
separately from household waste at the end of their useful life. Please DO NOT
dispose of this appliance in normal household waste. Your local appliance retailer
may operate a 'take-back' scheme when you are ready to purchase a replacement
product, alternatively contact your local government authority for further help and
advice on where to take your appliance for recycling.
Please recycle this packaging responsibly.
JB. 6709-a / KSHIV2O / REG00 / Made in China. © KitSound is a trademark
of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK
WATERPROOF
BLUETOOTH
SPEAKER
USER MANUAL
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hive2o and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kitsound Hive2o

  • Page 1 SPEAKER Please recycle this packaging responsibly. USER MANUAL JB. 6709-a / KSHIV2O / REG00 / Made in China. © KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK...
  • Page 2: Battery Information

    Please read this manual carefully before use. Battery Information Batteries may malfunction if they are not used for Warning: • extended periods Please don’t get the product wet • Over time, unused devices will discharge and must be • Please don’t take the product apart. There are no user serviceable •...
  • Page 3: Box Contents

    Exposing the KS Hive2o speaker to liquids without doing so may result in permanent damage to the speaker Do not expose the KS Hive2o speaker to water while charging. • This is very dangerous as doing so may result in personal...
  • Page 4 Functions Instructions for use Getting started 1. MFB (Multi-Function Button) 2. Aux in Port Charging the battery 3. Microphone 4. Micro USB Charging Port Give the speaker a full charge before its first use: 5. LED Indicator 1. Connect the supplied USB charging cable to the Micro USB Charging Port (4) and plug into power 2.
  • Page 5: Battery Protection Mode

    • discharge and recharge speaker every 3 months, even if you 3. Select ‘KS Hive2o’. If asked for a passcode, enter ‘0000’, use it or not and the device will pair 4. Once connected an audio tone will sound and the LED...
  • Page 6: Call Handling

    2. The LED Indicator (5) will flash white twice every 3 seconds End Call Short press MFB (1) during call Once connected to the Hive2o either wired or by Bluetooth, Reject Call Double press MFB (1) upon incoming call please follow the instructions on next page: Note: This feature is only available in Bluetooth mode.
  • Page 7: Specifications

    TWS (True Wireless Stereo) for stereo sound* Specifications 1. Both Hive2o speakers must be turned on and in pairing mode Bluetooth technology v4.2 ® (make sure your device isn’t connected to either while trying Bluetooth connectivity distance up to 10 m to pair for TWS) 2.
  • Page 8: Troubleshooting

    We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: support@kitsound.co.uk We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.

Table of Contents