Accompaniment Volume Control; Tempo; Dsp; Sound Console - Funkey DP-2688 User Manual

notes are correct or wong,the chords or left hand melody part
can sound.
Pressing【Left】&【Right】buttons at the same time,the left hand
and right hand can be learned at the same time,The system will
make estimation after thelearning was over.
Learning mode2 Pitch learning
1.Pressing 【Lesson】button repeatly to enter into learning mode2
in the state that song has been stopped play."Les2 R"reminder
marking lights in LCD .The system only estimates the correctness
of pitch of notes that learner has played,The song can go ahead
backwards when it needs learner to play correct notes.
If the pitch of played notes is wrong,the song will be in waiting
state until the correct notes was played.
2.Pressing 【Start/Stop】button to begin to learn song,it will give
estimation after the learning was over.
Learning mode3 Play mode
1.Pressing【Lesson】button repeatly to enter into learning mode3
in the state that song has been stopped play."Les3 R"reminder
marking lights in LCD .The system only estimate the correctness
of duration and pitch that learner are playing comprehensively.
The song plays normally,learner must play correct pitch based
on originalduration of song,then,it can be estimated correct by
system
2.Pressing【Start/Stop】button to begin to learn song,it wil give
estimation after the learning was over.
MP3 Play
MP3 Jack:MP3 song can play by this jack
Pressing【Play/Pause】button can switch present state of songs
Pressing 【Song∧】button ,one song goes backward,pressing
【Volume∨】button for longer time,the volume will reduce small.
Pressing 【Song∨】button ,one song goes forward,pressing
【Volume∧】button for longer time,the volume will increase large.
Les2 R
Les3 R
19

Accompaniment volume control

The accompaniment volume is used for adjusting the overall
volume of auto accompaniment.This function can get balance
between auto accompaniment part and the volume of keyboard
tone.
1.Pressing【ACCOMPANIMENT VOLUME∨】/
【ACCOMPANIMENT VOLUME∧】button,LCD display screen
will displays present accompaniment volume size temporarily,
the accompaniment volume size can be adjusted by pressing
【ACCOMPANIMENT VOLUME∨】/【ACCOMPANIMENT
VOLUME∧】again at this time.Adjustment range:0~127
2.Pressing【ACCOMPANIMENT VOLUME∨】and
【ACCOMPANIMENT VOLUME∧】buttons at the same time,
the accompaniment volume can be closed.LCD display screen
displays"Accompaniment volume：OFF".The accompaniment
volume can be opened by pressing 【ACCOMPANIMENT
VOLUME∨】and【ACCOMPANIMENT VOLUME∧】buttons
again at the same time.

Tempo

Every style has different best tempo value,you can change
tempo value based on your hobby and songs requirement.
1.The initial default tempo value can be changed by【Tempo∨】
/【Tempo∧】button.
2.The tempo can recover initial default value by pressing
【Tempo∨】/【Tempo∧】buttons at the same time.
Notice:
The tempo will be setted for the preset value of present
style automatically if you choose style when the styles
stopped,The tempo will keep same if you switch style
when the style are playing.

DSP

DSP is a sound field localization technology that imitates sound
in real environment. Use this function will enable you to hear
more open and full performance.
1.The DSP effect is automatically turned on when starting up,
and the "REVERB" and "CHORUS" mark lights on LCD.
2.Pressing 【DSP】button to turn DSP effect on or off.
Note:
In the process of rhythm or song playing, switching on/off the
DSP may cause a short pause or noise, which is a normal caused
by switching effect switches.

Sound console

The played volume of every tracks can be controlled solely by
sound console function.
1.Pressing 【 SOUND CONSOLE 】 button to enter into sound
console function menu,LCD will display corresponding value
temporarily.The fist time to enter into the sound console menu
when the power is on,The first option is "Percussion music track
volume"of sound console menu,The option that was entered
into again later is same as the option that exited from last time.
2.Pressing 【 SOUND CONSOLE 】 button again and again to
choose the track item that you want to do the setting,then,pressing
【+】/【-】 buttons to set parameters.
OFF Accomp
12