High Idle Adjustment - Toro GROUNDSMASTER 325-D Troubleshooting Manual

Commercial rotary mower

Hide thumbs Also See for GROUNDSMASTER 325-D:

Table of Contents

TORO GM 345

High Idle Adjustment.

1. Slowly move the throttle to the FAST position until the engine reaches 3200

Adjust the high speed adjustment screw until it contacts the speed control lever.

IMPORTANT: Do not overspeed the engine because transmission damaged could occur.

2. If 3200 rpm can not be attained, check the throttle cable adjustment.

The governor arm must not contact the cable cover when the unit is at high idle.

If the governor arm contacts the cable, loosen the retaining bolt and move the cable.

3. If the throttle lever on the instrument panel will not stay in the fast position, remove the panel cover and

tighten the nut and capscrew at the base of the throttle lever.

_______________________________________________________________________________________________________________

Ford VSG-411 Gas Engine

Notes

100. Shut off the engine.

Table of Contents

Show Quick Links

Table of Contents

Groundsmaster 345