Health O Meter PRO PLUS 1100KL Operation Manual page 37

Printer Parameters
Pinter model: CT-S280
Working voltage: DC8.5V-2.5A
This scale is featured with printing function by connecting the printer XXXXX:
1. Connect the printer cable to the PORT 1 of the scale
2. Turn on the printer power
3. Make sure there is no object on the weighing platform
4.Turn on the scale and wait till display show ZERO and 0.0 before step on the scale
5. Step on the scale and weigh
6. Input the data of patient ID, height, weight of wheelchair and etc.
7. Press 3 (PRINT) key , printer will print out the patient's ID,weight, height, BMI and etc.
Pin Configuration for ProPlus PrinterCables
RJ45 Function
6 TX
7 GND
1 2 3 4 5 6 7 8
RJ45
Content from printer as below:
1. ID
2. Weight
3. Height
4. BMI
5. Tare Weight
NOTE: Make sure the printer prior for the scale to print it normal
Connect the printer cable to the PORT 1 of the scale
NONE:
Direction of communication
<SCALE>
DB9
3
2
36
<PRINTER>
DB9