Advertisement
Quick Links
Advertisement
Related Manuals for Rhyas EFM4001
Summary of Contents for Rhyas EFM4001
-
Page 1: Belt Sander
Precision Belt sander EFM4001 Manual ORIGINAL INSTRUCTIONS... - Page 2 Fig. A Fig. B Fig. C...
- Page 3 Fig. D Fig. E Fig. F Fig. G Fig. J Fig. H Fig. I...
- Page 4 Precision Belt sander using the tool for different applications, or with different or poorly maintainted accessories, thank you for buying this rhyas product. may significantly increase the exposure level All our products are manufactured to the highest the times when the tool is switched off or standards of performance and safety.
- Page 5 Indicates the presence of an electrical Always check that the power supply voltage. corresponds to the voltage on the rating plate. Wear safety goggles. Class ll machine. Your machine is Wear hearing protection. double insulated; therefore no earthwire is required. specific safety instructions replacing cables or plugs Hold the machine by the insulated gripping...
- Page 6 Mounting the sanding arm • Place the spring (11) in the mounting hole. Do not set the speed during use. • Position the sanding arm (4). • Tighten the belt tracking knob (6) until the • Turn the speed adjustment wheel (7) to the sanding arm (4) is alligned with the tool.
- Page 7 machine, this will only delay the sanding. lubrication • Regularly check the condition of the sanding The device does not need any additional belt. Replace when necessary. lubrication. • Always sand with the grain of the wood. defects If a defect appears due to a part wearing out, 4.
-
Page 8: Spare Parts List
Spare parts list Position description 104224 Switch 104225 Speed control 104226 Rear pulley 104227 Wide arm 24 - 29 104228 Angled arm 27 - 29, 53 - 57 104229 Spring 104230 Tracking knob 104231 Carbon brush holder 104232 Carbon brush set 104233 Narrow arm 49 - 52, 46, 47... -
Page 10: General Safety Instructions
General Safety InStrUCtIOnS c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with Warning! your finger on the switch or plugging in power tools that Read all instructions. Failure to follow all instruc tions listed have the switch on invites accidents. -
Page 11: Declaration Of Conformity
DeClaratIOn Of COnfOrMIty efM4001 (en) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 9 June on the restriction of the use of certain... - Page 12 1406-05...