After proper installation and configuration, the Sitecom WLX-2001, WLX-2003, WLX-2006
and WLX-5000 range extenders adopt the name of your network router (or modem router)
and add _EXT to it.
The Sitecom WL-330 does not adopt the network name of the router (or modem router). This
model always retains its own network name. You can find this network name on the sticker
on the bottom of the product.
Back label of the WL-330, with the network name marked in red
Please note! If you changed your range extender's network name in the settings menu in the past,
you naturally need to look for that name.
Please note! If your range extender's network name does not appear immediately, refresh the list by
clicking the appropriate button (marked in red in the picture).
If your device is not connected to the correct network, double-click the appropriate network name to
establish a connection.
You almost always need to enter a network security key if you want to make a connection. This is
the same password you use to connect to your router (or modem router).
Page 2
Need help?
Do you have a question about the WL-330 and is the answer not in the manual?
Questions and answers